Bostitch F21PL Manuel d'utilisateur télécharger pdf (Page 6)

1. Open the magazine:

Pull pusher back to

engage the latch.

2. Load Nails: Hold nailer down

with magazine tilted downward.

Insert stick of nails

3. Close Magazine: Release pusher by

first pulling back on the pusher and then

pressing the pusher release tab. Slide

pusher against nails.

NOTE: Use only nails recommended for use in BOSTITCH Framing nailers or nails which meet the

BOSTITCH specifications.

When installing metal connectors with the F21PL, F21PL2, F33PT or F33PTSM: use only one

stick of metal connector nails at a time.

Never use contact trigger (black trigger) with metal connector attachment. Only use

sequential trigger (gray trigger) with metal connector attachment. Refer to trigger

conversion instruction included in the kit.

When installing Metal Connectors, use ONLY BOSTITCH Heat Treated Metal

Connector Nails.

Never use rafter hook to hang tool from body, clothing or belt.

LOADING THE F SERIES TOOLS

EYE PROTECTION which conforms to ANSI specifications and provides protection against

flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator

nd others in the work area when connecting to air supply, loading, operating or servicing

his tool. Eye protection is required to guard against flying fasteners and debris, which

could cause severe eye injury.

The employer and/or user must ensure that proper eye protection is worn. Eye protection

quipment must conform to the requirements of the American National Standards Institute,

NSI Z87.1 and provide both frontal and side protection. NOTE: Non-side shielded spectacles

and face shields alone do not provide adequate protection.

O PREVENT ACCIDENTAL INJURIES:

•

Never place a hand or any other part of the body in nail discharge area of tool while the air supply

s connected.

•

Never point the tool at anyone else.

•

Never engage in horseplay.

•

Never pull the trigger unless nose is directed at the work.

•

Always handle the tool with care.

• Do not pull the trigger or depress the trip mechanism while loading the tool.

F21PL, F21PL2, F28WW, F33PT, F33PTSM

PULL HERE AND ROTATE

COVER TO OPEN

GUIDE ROD

ACCESS WINDOWS FOR INSTALLATION

AND REMOVAL OF GUIDE ROD.

ROTATE COVER OPEN TO

INSTALL OR REMOVE

GUIDE ROD.

INSTALL OR REMOVE

GUIDE ROD THRU

REAR OF MAGAZINE.

GUIDE ROD

STORAGE CHANNEL

GUIDE ROD INSTALLATION AND REMOVAL F21PL, F21PL2, F33PT, F33PTSM TOOLS:

INSTALL GUIDE ROD THRU HERE TOP HOLE

FOR .113" TO .131" SHANK NAILS

ROTAT E COVER BACK TO CLOSE.

COVER ROTATED OPEN

INSTALL GUIDE ROD THRU HERE BOTTOM HOLE

FOR STORAGE ALONG OUTSIDE OF MAGAZINE

FOR .131" TO .162" SHANK NAILS

ROTAT E COVER BACK TO CLOSE.

Fig. 1

Fig. 2

Fig. 3

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Bostitch F21PL Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolets à agrafes Bostitch F21PL